Steel Strips
Narrow cold-rolled and precision strip in carbon, spring, stainless and nickel-alloy grades, 0.05–3 mm thick and 3–600 mm wide, in 2B, BA, No.4 and bright / temper-rolled finishes with conditioned edges.
Technical specification
| Parameter | Specification |
|---|---|
| Product | Narrow cold-rolled & precision strip |
| Thickness | 0.05 – 3 mm |
| Width | 3 – 600 mm |
| Finish | 2B · BA · No.4 · bright / temper-rolled |
| Edge | Slit · deburred · round edge |
| Material standards | ASTM A240 / A666 · A684 (spring) · EN 10088-2 |
| Temper | Annealed to full-hard (per order) |
| Documentation | EN 10204 3.1 / 3.2, PMI |
How it is made
Strip is slit from cold-rolled coil to the ordered width, then edge-conditioned (slit, deburred or round edge) and supplied in the required temper and finish. Precision strip is cold-rolled and, where specified, temper-rolled or hardened & tempered (spring temper) to a defined hardness. Temper and hardness govern the mechanical properties, so the values shown are representative and the actual temper is confirmed per order.
Grades & materials
Representative strip grades, with representative chemistry. Exact grade, temper, finish and edge are confirmed per order; availability is by verified capability.
| Material family | Grades | Standard | Service |
|---|---|---|---|
| Austenitic stainless | 304 / 304L / 316 / 316L / 316Ti / 321 / 347 | ASTM A240 / A666 | Corrosion, forming |
| Super-austenitic / heat-resisting | 904L, 309S / 310S | ASTM A240 | Severe corrosion / high temp |
| Spring steel | Cold-rolled spring temper | ASTM A684 | Springs, clips |
| Carbon steel | Cold-rolled CS | — | Forming, stamping |
Chemical composition (representative)
| Grade | C | Mn | Cr | Ni | Mo | Other |
|---|---|---|---|---|---|---|
| A240 304 | 0.08 max | 2.00 max | 18.0–20.0 | 8.0–10.5 | — | — |
| A240 316 | 0.08 max | 2.00 max | 16.0–18.0 | 10.0–14.0 | 2.0–3.0 | — |
| A240 904L | 0.020 max | 2.00 max | 19.0–23.0 | 23.0–28.0 | 4.0–5.0 | Cu 1.0–2.0 |
Standards & specifications
Material & product
- ASTM A240 stainless strip
- ASTM A666 stainless strip (mechanical tempers)
- ASTM A684 cold-rolled spring / high-carbon strip
- EN 10088-2 stainless flat products
Finish, temper & edge
- 2B, BA, No.4 & bright / temper-rolled finish
- Annealed to full-hard / spring temper
- Slit, deburred or round edge
- PMI, tensile / hardness where specified
Mechanical properties (representative grades)
Representative grades – full MTC values on request. Stainless values are ASTM specification minima for the annealed condition; strip in a temper-rolled, cold-worked or spring-temper condition differs and the actual temper / hardness is confirmed per order.
| Grade | Condition | Tensile (MPa) | Yield min (MPa) | Elong min (%) |
|---|---|---|---|---|
| 304 | Annealed | 515 | 205 | 40 |
| 316 | Annealed | 515 | 205 | 40 |
| 904L | Annealed | 490 | 215 | 35 |
| Spring temper | Cold-worked | per temper | per temper | per temper |
Testing, inspection & documentation
| Test / document | Detail |
|---|---|
| Chemical / PMI | Composition to the spec; PMI on stainless & nickel |
| Thickness / width / edge | Gauge, width tolerance & edge condition |
| Tensile / hardness | Tensile, yield, elongation & hardness per temper |
| Surface | Finish & cleanliness (2B / BA / No.4) |
| Certification | EN 10204 3.1 as standard; 3.2 where the contracted inspection responsibilities are met |
Applications & industries served
Available forms, sizes & range
Provide with your enquiry
- Thickness (0.05–3 mm) and width (3–600 mm).
- Grade, temper / hardness and finish.
- Edge condition (slit / deburred / round).
And the commercial detail
- Material standard and edition.
- Required tests (PMI, tensile, hardness).
- Coil weight / cut length, quantity and drawing.
Frequently asked questions
What width and thickness are strips supplied in?
0.05 mm to 3 mm thick and 3 mm to 600 mm wide; the exact size, temper and finish are confirmed per order.
What tempers and finishes are available?
2B, BA, No.4 and bright / temper-rolled finishes, from annealed to full-hard and spring temper. Temper and hardness govern the mechanical properties.
What edge conditions do you supply?
Slit, deburred or round (conditioned) edge, selected for the forming or assembly requirement.
Request a quote
Send your requirement to Sagiant Piping Industries and our team responds with grade, material selection, availability and pricing for strips. Attach a BOQ, line list or drawing for a faster, more accurate quotation.
- Fast RFQ response with grade & material-selection support
- EN 10204 3.1 / 3.2 certification, PMI & third-party inspection
- BOQ & line-list project supply — India & export
Mechanical & chemical values shown are ASTM/ASME specification figures; certified heat-specific values appear on the MTC. Availability is confirmed with the quotation.
