Fire & Safety Engineering Solutions
Sub categories under Fire & Safety Solutions
Use this category page to move directly into the relevant product or engineering service page, then share the project BOQ, drawing, grade, finish, quantity and inspection needs for a precise RFQ.
Technical coordination for fire & safety solutions
Sagiant Piping Industries supplies fire and life-safety products — fire-rated metal doors, fire dampers, smoke dampers and fire-rated shaft doors — to the UL, EN or BS test route specified for the selected model, where that model carries the supporting test evidence, for commercial, healthcare, industrial, hospitality and infrastructure projects. Testing and certification are distinct, and a product follows one route with its own report or listing rather than all three at once.
Fire performance is stated per tested model as a classification — for example 30, 60, 90 or 120 minutes of integrity (E), with insulation (I) where required — not as an open-ended range, and it belongs to the complete tested assembly of leaf, frame, core, seals, hardware and any glazing. Shaft and vision-panel doors are offered in both rated and non-rated versions, with the fire-rated models identified on each product page. Doors and dampers integrate with HVAC duct systems and building fire-compartmentation strategies; the applicable rating, route and documentation are confirmed per model.
Construction Materials & Grades
| Component | Material / Grade | Notes |
|---|---|---|
| Door skins & frames | GI (A653/A653M, Z-coating) or CRCA (IS 513 / ASTM A1008); SS 304 optional | Roll-formed, infilled core |
| Door core | Mineral / rockwool or honeycomb, to suit the tested model | Fire & acoustic results come from the doorset test, not the core alone |
| Dampers | Galvanized steel (A653/A653M, Z-coating) | Curtain & blade types |
| Seals | Intumescent & smoke/cold-smoke seals | Intumescent seals expand when heated; smoke seals work at ambient and need their own evidence |
| Hardware | Hinges, locks, closers, panic devices | Rated within the tested doorset; approved for that specific assembly |
Product Range (Sub-Categories)
| Product | Function | Rating / classification basis |
|---|---|---|
| Fire-rated metal doors | Compartmentation & escape routes | 30 / 60 / 90 / 120 min integrity, per tested model |
| Vision-panel fire doors | Fire door with glazed vision panel | e.g. 30 / 60 / 90 min where the glazing assembly is approved for that doorset |
| Fire shaft doors | Service shaft & riser protection | 60 / 120 min where offered as a rated model |
| Fire dampers | Duct fire isolation | Fire rating per UL 555 or EN 1366-2 test (route-specific) |
| Smoke dampers | Smoke-control isolation | Smoke-control classification per UL 555S or EN 1366-10 route |
Applicable Standards
| Scope | Standards |
|---|---|
| Fire doors | EN 1634-1 (fire test) & EN 1634-3 (smoke test), classified to EN 13501-2; BS 476-20 / -22; UL 10C — routes not interchangeable |
| Fire doors (India) | IS 3614 (2021 + amendments), with IS 17518 Part 1 where relevant |
| Fire dampers | UL 555 or EN 1366-2 (route-specific; orientation & supporting construction apply) |
| Smoke dampers | UL 555S or the EN smoke-control route (EN 1366-10); confirm the classification framework |
| Building fire safety | NFPA 80 (installation/maintenance), 90A / 92 (systems); NFPA 252 is a door fire-test method; NBC (applicable part/edition for the project) |
| Material & quality | IS 513, ASTM A1008 (CRCA), A653 (GI); ISO 9001 is quality management (certificate scope on request), not a product-performance result |
Frequently Asked Questions
What fire ratings are available?
Fire resistance is stated per tested model as a classification — for example 30, 60, 90 or 120 minutes of integrity (E), with insulation (I) where required — to the EN 1634-1, BS 476-22 or UL 10C route specified. It is not an open-ended range, and it applies to the complete tested assembly, not a component alone.
Are the fire and smoke dampers certified?
Certification applies to a specific listed model, size range, actuator, orientation and supporting construction — not to the category. Fire dampers follow the UL 555 or EN 1366-2 route and smoke dampers the UL 555S or EN smoke-control (EN 1366-10) route; the two are not interchangeable. Confirm the listing or report for the selected item.
Can fire doors include vision panels?
Yes, but the glass alone does not set the rating. The glazing product, beads, seals, fixings and aperture size must all be permitted for that tested doorset — matching minute ratings is not sufficient. The approved glazing assembly and its evidence are confirmed per model.
How do fire and smoke performance differ?
Fire resistance (EN 1634-1 / BS 476-22 / UL 10C) addresses integrity and, where required, insulation; smoke control (EN 1634-3 / EN 1366-10 / UL 555S) addresses leakage and is tested and classified separately. A fire-rated product is not automatically smoke-rated, and vice versa.
Do you provide test certificates?
Test evidence, classification reports or listings and installation guidance are supplied for the selected model where available, confirmed per item and project route — they are not implied for every configuration.
Engineering Categories
Pages in this category
Send your Fire & Safety Solutions requirement for technical review
Share quantity, application, opening dimensions, supporting wall/floor construction, the required performance and governing project standard, and — for doors — leaf/handing/glazing/hardware, or — for dampers — airflow, pressure and control requirements, with drawings and delivery location. The team will review the scope and respond with the next technical and commercial steps.