Process & Industrial Equipment Solutions
Sub categories under Process & Industrial Equipment
Use this category page to move directly into the relevant product or engineering service page, then share the project BOQ, drawing, grade, finish, quantity and inspection needs for a precise RFQ.
Technical coordination for process & industrial equipment
Sagiant Piping Industries designs and fabricates process and industrial equipment — pressure vessels, shell-&-tube and air-cooled heat exchangers, boilers, storage and fuel tanks, reactors, columns and skids — to ASME Sec VIII / Sec I, IBR, TEMA and API in carbon steel, alloy steel, stainless steel, duplex and special alloys.
Equipment is engineered to the applicable pressure code with qualified welding, NDE, PWHT and hydrostatic testing, supported by complete documentation including ASME data reports, IBR forms and as-built dossiers, with U/S-stamp and National Board registration available.
Materials of Construction
| Material Family | Grades / Specification | Service |
|---|---|---|
| Carbon Steel Plate | ASTM A516 Gr.60/70, A285-C, IS 2002 | General vessels & boiler drums |
| Alloy Steel (Cr-Mo) | A387 Gr.11/12/22, A335 P11/P22/P91 | High-temp / high-pressure service |
| Stainless Steel | SS 304/304L/316/316L/321/347 (A240/A312/A213) | Corrosive / high-purity process |
| Duplex / Super-Duplex | 2205 (S31803/S32205), 2507 (S32750) | Chloride & high-strength service |
| Boiler / Exchanger Tubes | A179, A192, A210, A213 T11/T22/T91 | Heat-transfer tubes |
| Cu-Ni / Brass / Titanium | 90/10 & 70/30 Cu-Ni, admiralty brass, Ti Gr.2 | Condenser/cooler tubing, seawater |
Equipment Range
| Equipment | Type / Configuration | Code |
|---|---|---|
| Pressure vessels | Vertical / horizontal, jacketed, reactors, columns | ASME Sec VIII Div 1 / 2 |
| Heat exchangers | Shell-&-tube, air-cooled, plate, kettle reboiler | TEMA, ASME Sec VIII, API 660 / 661 |
| Boilers | Fire-tube, water-tube, WHRB, thermic-fluid | ASME Sec I, IBR |
| Storage / fuel tanks | AST, bunded, day, skid, underground | API 650 / 620, UL 142, IS 803 |
| Skids & packages | Pump/compressor skids, process modules | Project spec |
Applicable Codes & Standards
| Scope | Standards / Codes |
|---|---|
| Pressure vessels | ASME Sec VIII Div 1 & 2, PD 5500, EN 13445 |
| Boilers | ASME Sec I, IBR, EN 12952 / 12953 |
| Heat exchangers | TEMA R/C/B, API 660 / 661 |
| Welding & NDE | ASME Sec IX (WPS/PQR), Sec V (NDE) |
| Storage tanks | API 650 / 620, UL 142, IS 803, OISD / PESO |
| Certification | ASME U / U2 / S-Stamp, NB, ISO 9001, PED 2014/68/EU |
Frequently Asked Questions
Which pressure codes do you build to?
ASME Sec VIII (vessels/exchangers), Sec I (boilers), IBR, TEMA and API 650/620 for tanks.
Can you ASME-stamp equipment?
Yes — U / U2 / S-stamp and National Board registration are available.
What NDE and testing is included?
RT, UT/PAUT, MPI, PT, PWHT and hydrostatic/pneumatic testing per code.
Which materials do you fabricate?
Carbon steel, Cr-Mo alloy, stainless, duplex and special tubing (Cu-Ni, brass, titanium).
Engineering Categories
Pages in this category
Send your Process & Industrial Equipment requirement for technical review
Attach drawings, BOQ, quantities, standards and delivery requirements. The team will review the scope and respond with the next technical and commercial steps.