Laser Cutting & Fabrication Solutions
Sub categories under Laser Cutting & Fabrication
Use this category page to move directly into the relevant product or engineering service page, then share the project BOQ, drawing, grade, finish, quantity and inspection needs for a precise RFQ.
Technical coordination for laser cutting & fabrication
Sagiant Piping Industries offers CNC fiber-laser cutting and downstream fabrication — bending, welding, machining and finishing — in mild steel, stainless steel, aluminium, GI, CRCA, brass and copper, cutting up to ~25 mm with ±0.1 mm accuracy from your DXF/DWG/STEP files.
High-power fiber lasers deliver clean, burr-free, repeatable parts with minimal heat-affected zone — for components, decorative screens, grilles, brackets and full project packages — with nesting optimized for material yield.
Laser-Cutting Capability by Material
| Material | Grades | Max Thickness (Laser) | Edge Quality |
|---|---|---|---|
| Mild / carbon steel | IS 2062, A36, S275 | ~20–25 mm | Clean (O₂ assist) |
| Stainless steel | 304/304L/316/316L/430 | ~15 mm | Bright (N₂ assist) |
| Aluminium | 5052, 6061, 6063 | ~12 mm | Bright (N₂ assist) |
| Galvanized steel | A653 Z180–Z275 | ~6 mm | Clean, minimal zinc burn |
| Brass / copper | C26000 / C11000 | ~6–8 mm | Clean (fiber source) |
Fabrication Processes & Capabilities
| Process | Capability | Notes |
|---|---|---|
| CNC fiber laser cutting | Up to 3000×1500 mm bed | ±0.1 mm, optimized nesting |
| CNC turret punching | Up to ~6 mm | Forms, louvers, perforations |
| CNC press-brake bending | Up to ~4 m, ~135 t | Repeatable bends |
| Welding | TIG / MIG / MAG / spot / robotic | Certified WPS-PQR |
| Finishing | Deburr, powder coat, plating, passivation | In-house line |
| Laser etching / marking | Logos, part numbers | Permanent marking |
Applicable Standards
| Scope | Standards |
|---|---|
| Material | IS 2062, ASTM A36 / A240 / A653, EN 10025 / 10088 |
| Welding | AWS D1.1 / D1.6, ASME Sec IX, ISO 3834 / 9606 |
| Tolerance | ISO 2768 |
| Coating | IS 4759 / ASTM A123, RAL powder coat, ASTM B117 |
| Quality system | ISO 9001; QAP / ITP |
Frequently Asked Questions
How accurate is laser cutting?
Typically ±0.1 mm positional accuracy with excellent batch repeatability.
What thickness range can you cut?
From 0.5 mm sheet up to ~25 mm mild steel plate, material dependent.
Do you offer downstream fabrication?
Yes — bending, welding, machining and finishing follow cutting in-house.
What turnaround can I expect?
Prototypes often within a few days; production lead time depends on volume and finishing.
Engineering Categories
Pages in this category
Send your Laser Cutting & Fabrication requirement for technical review
Attach drawings, BOQ, quantities, standards and delivery requirements. The team will review the scope and respond with the next technical and commercial steps.